Monday, August 5, 2019
Tuesday, January 27, 2015
Note: Apply at your own risk. It may void your warranty if you root your phone. We aren't responsible for any kind of damage of your phone. However, if you successfully root your Walton Primo RX2. Then you will enjoy it.
Here in this article you will learn the best method to root your Walton Primo RX2. After rooting your Walton Primo RX2 you will be able to maximize battery life, install custom ROMs, Partition your SD card to use SWAP and Update your Android OS any many more.
Necessary Downloads
Now Rooting the Walton Primo RX2
- Enable USB Debugging on your device. To do this, go to Settings > Application > Development and then check the USB Debugging tickbox.
- Download and install the drivers.
- Open SP Flash Tools and click Scatter Loading, Than select Scatter file from your device.
- Click RECOVERY from the list. A new window will appear, Than select your downloaded recovery image that you want to flash. Click download at the top of SPFT
- TURN OFF your phone and remove the battery from your phone. After that, connect your switched OFF phone to your computer via USB Cable.
- You will see a green circle indicating it’s finished successfully.
- Now disconnect your phone to PC. Than TURN ON your phone and copy the SuperSU zip file you downloaded earlier to anywhere on your phones SDCARD.
- Power off your Primo RX2 then hold down Volume Up, and Power buttons together.
- Once in CWM Recovery, choose “install zip from sdcard” and hit the Power button.
- Choose “choose zip from sdcard” and hit the Power button.
- Browse and find the SuperSU zip file you copied over earlier and hit the Power button.
- Choose “Yes” and hit the Power button.
- This will install su binaries and SuperSU superuser app on your phone.
- Go back to main menu and choose "reboot system now"
If you want to check that your phone is rooted or not then you have to download this Root Checker application and verify it yourself.
Wednesday, October 1, 2014
Necessary Downloads
1. Download TG HTTP.2. Download TG HTTP DroidREL.cfg
Let's Start TG HTTP
1. Install and Open TG HTTP 1.2.exe You will be prompted to a Security Alert (If you're using Widnows vista, 7 or 8). Click Allow access.2. Tap on File, Than Click Load config File.
3. Select your downloaded "DroidREL.cfg" File, Than click Open.
4. Now tap on Start button.
Now Configure Browsers and IDM
1. On Mozilla Firefox Tools>Options>Advanced>Network>Manual proxy configuration and put HTTP proxy "127.0.0.1" port "8080" than click ok
2. On IDM ( Internet Download Manager ) Options> Proxy / Socks, Check Proxy and write
Proxy server address "127.0.0.1" Port "8080"
Sunday, February 23, 2014
Necessary Downloads
Let's Start GP Free Net For PC
- First activate any net package than connect to the Internet with "gpwap" apn
- Download and extract configured Portable proxy.rar in the desktop.
- Open XT181PP.exe from the extracted folder
- Now Click on Listen button and Minimize Portable proxy window
- Configure your browsers and download managers with proxy 127.0.0.1 and port 8080 and enjoy unlimited GP free net.
Tuesday, February 11, 2014
There are many benefits of rooting your Android device. It unlocks many features that were earlier blocked and allows you to run apps that require root access. It allows the users to get full access of your devices and make you a advanced user.
Note: Apply at your own risk. It may void your warranty if you root your phone. We aren't responsible for any kind of damage of your phone. However, if you successfully root your Walton Primo E2. Then you will enjoy it.
Here in this article you will learn the best method to root your Walton Primo E2. After rooting your Walton Primo E2 you will be able to maximize battery life, install custom ROMs, Partition your SD card to use SWAP and Update your Android OS any many more.
Necessary Downloads
Now Rooting the Walton Primo E2
- Download and Install the Framaroot APK
- Once the Framaroot been installed, launch it from your App Drawer.
- Select Install SuperSU from the first dropdown menu.
- As for selecting the exploit, For MTK devices select Boromir, Barahir or Faramir (If it says Failed ... Try another exploit if available). tap on it in the app.
- The app should begin rooting your device, shouldn’t take too long to finish.
- Reboot your device once it’s been rooted.
- You’re all done!
If you want to check that your phone is rooted or not then you have to download this Root Checker application and verify it yourself.
Sunday, January 26, 2014
Walton Primo ZX Full Specifications
| ||
GENERAL
| 2G Network | GSM 850 / 900 / 1800 / 1900 |
3G Network | UMTS 900/1800/2100 MHz | |
SIM | Micro SIM | |
Announced | January, 2014 | |
Status | Coming soon...Exp. release 2014, March | |
Price | Exp. price 30,000 BDT Only Available in Bangladesh | |
BODY
| Dimensions | 150.6 x 75.0 x 9.5 mm |
Weight | n/a | |
DISPLA
| Type | IPS FHD Capacitive touchscreen with 16.7 M colors |
Size | 5.5 inches with (1920x1080) pixels | |
Multitouch | Yes, up to 10 Fingers | |
Protection | Yes, Gorilla Glass v3 | |
SOUND
| Alert | Vibration, MP3 ringtones |
Speaker | Yes | |
3.5mm jack | Yes | |
MEMORY
| Internal | ROM 32 GB, RAM 3 GB |
Card slot | microSD, up to 32 GB | |
DATA
| GPRS | Yes |
EDGE | Yes | |
Speed | GPRS / EDGE/ 3G / 4G / HSPA+ | |
WLAN | 802.11, Wi-Fi Hotspot | |
Bluetooth | Yes, v4.0 with A2 DPR | |
USB | Yes, microUSB v2.0 with OTG | |
CAMERA
| Primary | 16 MP with (4128x3096) pixels |
Features | Geo tagging, Face and Smile detection, panorama, HDR, BSI Sensors, Blue Glass v3, f/2.2 aperture, CMOS sensors, LED Flash, Dual LED auto focus | |
Video | Yes, 1080p Full HD | |
Secondary | Yes, 8 MP with 1080p Video recording | |
OTHER FEATURES
| OS | Android OS, v4.2.2 (Jelly Bean) |
Chipset | Qualcomm Snapdragon 800 | |
CPU | 2.26 GHz Quad-Core Cortex A-7 | |
GPU | Adreno 330 | |
Sensors | Accelerometer(3D), Orientation, Gyro, Proximity, Compass, Light sensor | |
Messaging | SMS(Threaded view), MMS, E-mail | |
Browser | HTML 5 | |
Radio | FM Radio | |
GPS | Yes, A-GPS support with GLONASS | |
Java | Yes, via Java MIDP emulator | |
Color | Black, White | |
BATTERY
| Capacity | 2500 mAh |
Technology | Li-ion non-removable strong battery |
this page is 100% correct.We mostly collect info through
manufacturers official website and well reputed sources
from internet.
Friday, January 10, 2014
Before You Proceed:
- There have been problems reported while running the tool used in this guide on Windows XP, so make sure you have a Windows 7-8 based PC.
- Make sure you have the necessary drivers installed before you begin. If you are unsure about this, check the next section to download and install the proper drivers.
- Enable USB Debugging mode. Go to Options > Applications > Development > USB Debugging.
- Battery should be full.
Necessary Downloads
Now Rooting the Walton Primo H2
2. Connect your device to the PC using a microUSB cable. Windows should install the drivers at this stage if it hasn’t done so already.
4. Tap on Next button.
6. Tap on Next button.
7. Tap on Next button
8. Click Verify Device Connectivity. If device status does online than tap on Next button.